Thursday, October 18, 2018

November 2018 Hifi Show


To all readers based in Manila, please mark your calendars.


Don't miss a guaranteed good time. πŸ‘πŸ‘πŸ‘


Here's a preview of what I will miss. 😒

G.I.P. Laboratory + Harana Audio Collaboration









GIP 815 in Harana Audio V-Vent cabinets


Harana Audio Workshop


Suzuki-san inspecting the electronics - Wavelength Audio SE45 with Magnequest Cobalt OPTs driving the horns and SE300B with Tamura Permalloy OPTs driving the bass, signal source = DEQX HPD5


Suzuki-san is listening


ApprovedπŸ‘πŸ‘πŸ‘ŒπŸ‘Œ

Time for lunch!


Oh wait a moment...
let's have some Beethoven Moonlight Sonata as an appetizer 😁

Visit GIP Labs in room 646 and Harana/GIP next door, 647. 
Cheers to Suzuki-san and Joey.🍻





Monday, October 1, 2018

Kutztown Radio Show September 21-22, 2018

All pictures were taken with a Fuji X-E1 camera + Canon 28mm f3.5 LTM lens.


I wasn't able to attend as many hamfests/radio shows this past summer. So I made sure I went to Kutztown.  


This speaker caught my attention as something I've encountered in a vintage magazine in the past. Since there was no one manning the booth, I went on...


A pair of University Lowboys + an EV Aristocrat


Nice Gates CB77, but I couldn't afford it 😞


Belt-driven Rek-O-Kut


Scott 299, LT110B FM tuner, Fisher KX100, etc.


Fisher PP EL84 mono block


My bud Larry always has a live demo set-up.


Sonographe SD-1: mid-80s Philips 14-bit oversampling chassis with twin TDA1540 DACs, audio section tweaked by conrad-johnson, nice piece but check out that asking price 😲


Tubes galore!



I scored a TDA1543 equipped Magnavox CD player from this booth. 



Lots of 70s-80s Hi-Fi equipment 



Used CD prices are at an all-time low πŸ˜ƒ


The speaker I spotted earlier kept haunting me. I just had to give it a new home. My gut feel was right - it's a Stewart Hegeman-designed omni-directional speaker. 😎









Tuesday, September 11, 2018

Noguchi Transformer Co. Ltd, Closing


Noguchi Transformer Co. Ltd announced that they are closing on September 29, 2018.😞😞😞


Located at the basement of Tokyo Radio Department Store in Akihabara, I was first exposed to their existence in the early 90s through their ads in MJ Audio Technology and Stereo Sound Tube Kingdom magazines. 

MJ 11-1994 

Back in the 90s they ran 2-page ads for Tamura, Tango and their in-house manufactured transformers.

Hashimoto

I was glad to see their store when I visited Tokyo in November 2015. They still had a good stock of Hashimoto, some Tamura and a comprehensive line of their house brand transformers. 

Noguchi + Tamura 
I am speculating that just like everywhere else in the world, the Japanese market for DIY/vacuum tube/single-ended triode amps is also shrinking. This explains why these manufacturers are closing shop, 😞 not to mention the fierce competition from China.

"mid-price" Finemet OPT ad in MJ 12/2015
  
The Noguchi Finemet models represented their finest quality output transformers.


Even if I stretched my budget a bit, it was a good call that I added a pair of PMF-10WS and PMF-15WS + a single Finemet FM3WS-H and a pair of Finemet FM6WS to my collection. πŸ™‚


Sayonara!


!!UPDATE!!

As posted by "dan" in the comments section below, the entire line of Noguchi is now represented by General Transformer in the same location at Tokyo Radio Department Store in Akihabra. 





Saturday, September 1, 2018

Azzolina Audio KS12024

Western Electric KS12024

Western Electric KS12024
Note: ~ 140° throat bend

The Western Electric KS12024 is a 2-piece cast aluminum 4-cell sectoral high frequency (800-1000Hz cut-off) horn with a 50°H x 40°V dispersion pattern. It was implemented in the Western Electric L-8  and L-9 speaker systems.

Western Electric L-8
from the Silbatone Collection

Western Electric L-8  = 1 x WE754A + 1 x KS12024 + 1 x WE713B (phenolic diaphragm)

Western Electric L-9

Western Electric L-9 = 2 x WE754A + 2 x KS12024 + 2 x WE713B

Western Electric L9
(Note: 2 x WE713B)

Images were taken from J-Rob's KS12024/Western Electric L-8 post at Hifi Haven. If you want to learn more about the Western Electric L-8 and L-9, you can download the pdf file at the bottom of Joe's post.

Read about J-Rob's musings (post #125) about the original KS12024 and Azzolina repro at Hifi Haven.

Late 40s Western Electric Brochure
from www.hifilit.com

The KS12024 horn was from the same era as the WE32A horn that included the venerable WE757A studio monitor, WE713x compression drivers, WE755AWE756A and WE728B direct-radiator speakers.

Having been a long-time user of the Altec 755A, Altec 32A/C and more recently an Altec 756B, I consider this period as the golden age of design and manufacture of permanent magnet transducers. So when J-Rob offered to loan his personal pair of Azzolina Audio 3-D printed KS12024 horns for me to blog about, it was a privilege and opportunity difficult to pass up.

Azzolina Audio KS12024


I've been a frequent visitor to the ElectraVolt blog but never imagined I would be listening to, let alone reviewing, Charles Michlin's KS12024 reproductions. 


The original Western Electric KS12024 has a 0.7" round opening* but this Azzolina remake was optimized for 1" compression drivers like the Altec 802 that I am using for this review. As relayed by J-Rob, Charles claims the oval (rather than round) aperture sounds better. 

*All the WE horns from this era (including the 32A) were designed for use with the WE713x compression drivers and shared the same aperture size


Just like the original, this is also a true 4-cell compound sectoral horn. AFAIK, this is the model built from an amorphous plastic material. Everything else you need to know about the Azzolina KS12024 can be found here.

Testing

Altec 414A/614 + Azzolina KS12024/802 + 3000H

The Azzolina KS12024 horns were tested in the Altec 2-way system. 

Altec 414A in 614 cab 

Altec 414A woofers in 614 bass reflex enclosures running in full range mode

High-pass XO w/HF eq

Altec 802-8D compression drivers (below) with 16 ohm GPA 34852 diaphragms were mounted to the horns using the above high-pass crossover


Amorphous Plastic Azzolina KS12024 vs. Plastic Altec 32C


Altec 32C + Altec 802

This horn presents a back row perspective and may sound too laid back to those who prefer a closer to the stage presentation. The mid-range is juicy, full and vivid without a hint of shout. While the highs are feathery smooth, silky and airy, which I've only heard from its smaller sibling, the Altec 3000H. Tish (my wife) describes this horn as sublime. I think the 90°H x 40°V dispersion helps provide that holographic and lush atmosphere. 

I've written so much about this horn. Just use the search button on the right hand corner to find past entries.


Azzolina KS12024 + Altec 802

I was initially lured into the 3D-like midrange this horn produced and that lingered on. There's an uncanny realism to male and female vocals as well as musical instruments that renders an "in your room" presence. Compared to the 32C, this horn offers a front row perspective. Yet there isn't a trace of harshness or shout. Definitely a horn that will appeal to those who find the 32C too laid back yet need a horn that doesn't sound like a horn.

It is superior to the 32C in terms of articulation and detail without ever sounding analytical. There's a lot of snap, if I may borrow a term from its owner πŸ˜‰, just like its stable mate - the WE/Altec 755A.

Azzolina KS12024 + Altec 802 + Altec 3000H

Tish thinks it is as good as but not quite as lush as the Altec 32C. I agree. This is primarily a tonal balance issue. Due to the prominent midrange, the extreme treble frequencies are slightly subdued giving a less airy atmosphere. Adding the Altec 3000H to fill in the uppermost octave helped in approximating the lushness of the 32C. But I still found myself wanting more "hall sound." I speculate that the KS12024's narrower 50° horizontal dispersion contributes to the comparatively austere background. Perhaps I am belaboring this point since my personal preference when I attend concerts is to sit towards the back row so I can relish equal amounts of direct and reflected sound.

Summed up

2 x KS12024 = 100° H x 40° V

These two horns share the same sonic DNA but are genetically modified for different applications. The more up-front and involving Azzolina KS12024 betrays its theatre heritage versus the mellower 32C, which was intended for near-field monitoring. I can't help but wonder if a horn design combining the virtues of both designs is a possibility.