Home Brewer: Silbatone 755 Cabinet DIYers Club

Left = JE Labs clone (by John Piro)
Right = J-Rob's Silbatone original 

"The cabinets were designed by genius Silbatone engineer Dr. Stefano Bae as a group project for the Silbatone-sponsored DIY/Western Electric forum in South Korea. 100 pairs were quickly sold out, immediately driving up the world price for 755As. The original uses Silbatone's custom silver litz wire, which is said to be an essential ingredient of the original recipe, and top shelf WBT connectors.

Over the years Silbatone designed and made literally dozens of experimental boxes, including back horns for up to four (755A) drivers per side. This was probably the most successful, although rather modest.

My analysis of this untuned little cabinet is that it falls under the 'small box with a hole in it' design paradigm."

Joe Roberts 

May 17, 2019

After I uploaded the Silbatone cabinet DIY info, I've received numerous inquiries about what drivers to use on this cabinet. Since it's impossible for me to try all the 8" drivers ever made, I thought it was best to let my readers chime in with their creations.

Altec 755As in Manila

Tango MCT999 MC transformer,
JE Labs 5691 passive EQ RIAA phono + 76 > Tango NP216N line stage, 
JE Labs SE2A3 with Magnequest TFA204 OPTs (on the floor)

Nonong is the only high school classmate and friend I remained in contact with after leaving Manila many moons ago. He coined SETUP (Single Ended Triode Users of the Philippines) back in the '90s and was one of the three pioneers listening to idler driven turntables, high mass tonearms, SPU cartridges + transformers, DIY preamps and SET amps driving high efficiency speakers.

Garrard 301 + Ikeda IT407 + SPU Meister Silver
JE Labs SE300B deluxe mono blocks with Tamura F7002s 
on copper chassis

His cherished pair of Altec 755As have been mounted on open baffles since the mid '90s. But as soon as he saw the Silbatone cabinet plan, he had the cabinets built in no time.

Altec 755As in the USA

Nate Grindheim aka Redboy in Audiokarma and HiFi Haven is an avid DIYer. You'll find his meticulously crafted MC step up transformers and amps in those aforementioned audio forums as well as in his Flickr stream.

Nate says:

"My buddy Gary (aka ejfud) built the cabinets for me. He knew I had the drivers and got tired of waiting around for me to build something for them, so he took the initiative to knock a pair together for me. He's a good friend to have around.

These things are really wonderful. They have that amazing Tone (with a capital "T"!) that I'm after, and the sound... it's just right, and good. They make music.

I am excited to get some proper amplification for them. There's a pair of 6L6 IPC amps here with Peerless iron that I think will be a great match, but I still need to overhaul them."

Altec 755C in Manila

Ben C recently retired from banking so he can focus his energy on his DIY audio passion. He's been stuck in Toronto since the Covid 19 lockdown and is itching to return home to finish his other audio projects.

Garrard 401 + RMG309 + FR64S + SPU Aniversary,
DIY preamp and SET amps

 I'm hoping that he'll drop by before he heads back to Manila when this is all over.

Altec 755E + JBL 075 in Manila

This bespoke cabinet is Joey's interpretation of the Silbatone executed in the Harana Audio Workshop. 

Harana Audio is also the official representative of Shinichi Suzuki and his Western Electric inspired G.I.P. Laboratory field coil drivers in the Philippines.

Lafayette SK98/Pioneer PIM8L in the USA

I've featured this driver and cabinet in a full-length profile of John Piro's creations. But it's worth reiterating a non Altec 755 driver successfully used in the Silbatone cabinet.

If you want your DIY Silbatone cabinet project added to this exclusive club 😉, please leave a comment with your email address. I will reply to you directly.