Magnavox 8601, JE Labs Style

A Tribute to Don Garber of Fi + Robin and Lipman!

Don Garber's Fi 2A3 amp Ad from Sound Practices

My first exposure to Don Garber's Fi 2A3 amp was at a gathering of burgeoning SE-DHT/High Efficiency speaker enthusiasts organized by Mike LaFevre of Magnequest and Peter Breuninger, then president of the Philadelphia Audio Society. This was held in the outskirts of Philly during the latter part of 1994. I attended to assist my friend Steve Melkisethian in exhibiting the Audio Note Kit 1 amplifier since he was the US distributor of Audio Note UK Kits, transformers and parts at that time. Sadly, these guys are no longer with us. 😔

AliExpress Amorphous SE OPTs + Jean Hiraga and the SE-DHT Amp Revival

AliEx amorphous, Hashimoto HL20K6 + Sony TamRadio line output transformers

L>R: 6AH4 + AliEx, 12B4A + Sony/Tamradio and 6AH4 + Hashimoto HL20K6

The last time I saw my buddy J-Rob was pre-COVID, but we keep in touch via email and text messages. During one of those hello/how you doin' moments, the chat progressed to line preamp transformers and how the $100/pr. amorphous jobs from AliExpress perform. 

I used to own a pair of Tango/Hirata NP216N nickel line OPTs, which were featured in my Sound Practices issue 17 homebrewer article. In hindsight, I don't think I gave them a fair chance so this was a good opportunity to revisit the topology.

SE171A Amp Remastered

My dad would've turned 97 today. To celebrate his birthday, the video clip above features a recording of his favorite violinist, Nathan Milstein, playing Presto from Bach's Sonata No. 1 in G minor for unaccompanied violin. While he was doing post-graduate studies at The Juilliard School in the mid 50s, he was fortunate to have attended concerts of the great violin virtuosos of that era - Jascha Heifetz, David Oistrakh, Nathan Milstein, etc.

He would later recount that Nathan Milstein's performance of the Glazunov violin concerto was the most unforgettable! Even if he never got a chance to add this violin concerto to his repertoire, he conducted the Manila Chamber Orchestra with me playing the Glazunov violin concerto in 1987. The music of the slide clip above is the middle movement from our performance.

Before I bore everyone reminiscing about my dad and our life as musicians, let's get on with the subject at hand. The amp featured in this upload uses a directly heated triode power tube that was introduced around the time my dad was born.

JE Labs Choke-Capacitance Coupled SE2A3 amp

Canon P + Canon 50mm f1.8 LTM 
Foma 100 in Rodinal

Inspired by my plate choke-loaded 76 line stage preamp adventures, I was curious how a similar driver circuit configuration would sound in an SE2A3 amp. So I pulled out my Radiotron Designer's Handbook, 3rd Edition to gain a better understanding of choke-capacitance coupling (aka plate choke loading) vis-à-vis resistance coupling.

Below are highlights of relevant information I gathered.

morrison micro 2A3, reimagined + Kasuga Wireless KA6625ST output transformer

Joe Roberts' piece, "I Never Met a 2A3 Amp That I Didn't Like," from Sound Practices Issue 15, is very persuasive. I built jc morrison’s micro 2A3 amp soon after I received the issue via snail mail fresh from the printers in the mid '90s. After rereading the article in ‘07, I got inspired to make a Radiotron SE2A3 variant.

Darling Amp, JE Labs Style

Hashimoto H-203S from Kasuga Wireless

In September 2018, I lamented the demise of Noguchi Transformers. Fast forward to November, my brother-in-law visited Tokyo, and was kind enough to pick up a couple of transformers at Kasuga Wireless.

How to get to Kasuga Wireless

Kasuga Wireless

Address: 1F, New Akihabara Center, 1-16-10, Kotobuki, Chiyoda-ku, Tokyo 101-0021

Hashimoto H-203S

The H203S was installed as a 3.5k primary Z output transformer in the je2a3 mono integrated amp. 

Testing

Top trace = audio generator

Bottom trace = amplifier output

100Hz

1kHz

10kHz

5.324Vrms to an 8 ohm load = 3.5W 

In the past, I've used Hashimoto transformers for a pair of SE2A3 and a pair of SE10 mono-blocks I built for friends. I know these transformers are well designed, are of high quality construction and sound excellent. Thus, before Hashimoto ceases production, I had to add it to my collection. 

My mono SE2A3 integrated is ready for prime time!

Now I have to find a nice circuit for a pair of Kasuga KA6625ST OPTs. 😉

Morikawa SE2A3 in Jose's Listening Room

Noguchi Transformer Co. Ltd, Closing

Noguchi Transformer Co. Ltd announced that they are closing on September 29, 2018.😞😞😞

Noguchi Finemet: FM-3WS-H + FM-6WS output transformers

This was the last extensive testing and listening session I did in the attic before we moved back to the states. I misplaced some data and just recovered them recently. So as promised in a previous blog entry, here's the write-up on the two entry-level SE Finemet OPTs from Noguchi.

WARNING

These are bonsai-sized output transformers. If HUGE iron + HIGH inductance and thumping bass frequencies is your idea of high-fidelity you should STOP 🛑 here!😉

However, if the finesse and realism a WE/Altec 755A can provide within its 70-13 kHz bandwidth is your idea of a GREAT time, please proceed!😊  

Noguchi FM-3WS-H

Noguchi FM-3WS-H + Tamura F7004

David vs. Goliath - indeed, the FM-3WS-H is tiny. I had to mount it on a perf board so that it wouldn't fall from the square mounting hole left by the Tamura F7004 ;)

Budget SE OPTs - Edcor and Noguchi

All output transformers were tested in the je2a3 amp using the same procedure as I did in the Hammond 125ESE many moons ago. Listening sessions were done through the same amp driving a single Altec 2-way speaker system. 

Hashimoto HC-203U SE output transformer