3D printed WP12024 horn from Lycan R&R

In late September, I received a message from Trieu of Lycan R&R, asking if I'd be interested in evaluating his 3D-printed prototype pair of multi-cell horns.

Before proceeding further, this blog entry contains a lot of hyperlinked texts to either previous entries or other sites pertinent to the article (e.g. "Lycan R&R" above). Mousing over and clicking those texts will open the link on another page. Thanks!

Design notes from Trieu: "These horns are slightly wider. The original KS12024 has a rather narrow 50° horizontal dispersion. When updated to the 1" driver opening, the wider initial diameter of the of the 1" driver would not allow for the throat geometries to work correctly. I felt the slim vertical profile of the original KS12024 is important sonically.

The best way to maintain it is to increase the horizontal width via a wider angle. So I increased the horizontal dispersion to 62.5° allowing for the proper expansion and geometries of the throat piece. BTW, I used carbon fiber infused PLA filaments."

OJAS Listening Room @ USM in SoHo NYC

I never imagined 30 years after the late Don Garber closed his Fi audio gallery at 30 Watts Street, that there would be a similar gallery in SoHo NYC again.

In the summer of 2022, I visited Devon Turnbull's OJAS exhibit at the NYC Lisson gallery. Click here to read about it. This past summer, a similar exhibit was presented at the London Lisson gallery. 

As soon as the London exhibit concluded, Ken Micallef, whom I follow on YouTube, uploaded this video featuring OJAS hifi systems inside a posh SoHo boutique. This was the main motivation to add it to my list of must-see places on my next NYC trip! 

Without further ado, here's what Tish and I experienced when we visited in mid November 2023.

Harana Audio @ the November 2023 Hi-Fi Show

After a four-year hiatus, my frequent collaborator and buddy, Joey of Harana Audio is back in the game with Klangfilm inspired speakers. 👍👏😊

November HiFi Show 2023

 An event not to be missed by music enthusiasts based in or visiting Manila, Philippines 

Mark November 11-12, 2023 on your calendars.🍻

Celebrating music for twenty years!

Kutztown Radio Show Fall 2023

 What I saw...

...and heard 😊

JE Labs Choke-Capacitance Coupled SE2A3 amp

Canon P + Canon 50mm f1.8 LTM 
Foma 100 in Rodinal

Inspired by my plate choke-loaded 76 line stage preamp adventures, I was curious how a similar driver circuit configuration would sound in an SE2A3 amp. So I pulled out my Radiotron Designer's Handbook, 3rd Edition to gain a better understanding of choke-capacitance coupling (aka plate choke loading) vis-à-vis resistance coupling.

Below are highlights of relevant information I gathered.