I was too wound up after playing a gig one winter Sunday evening. Watching episodes of the Grand Tour over a couple shots of Ballantine Scotch Whiskey was not enough to relax my mind. So I ended up "window" shopping on Amazon.
Sunday, March 25, 2018
Thursday, March 8, 2018
Audio Silente parts for the Thorens TD124 + Mk. II
![]() |
| Thorens TD 124 Mk. I + Stax UA3NL |
My Thorens TD 124 Mk. I and Mk. II have seen so much action and deserved pampering.
Tuesday, February 20, 2018
Conquering RFI in the 2C22/7193
![]() |
| Noisy and unstable 2C22/7193 |
Moving closer to civilization, this lovely sounding triode used as a voltage gain stage in my SE2A3 mono integrated amp had stability issues due to RFI.
Since I persist in using these antediluvian devices, I had to find a solution.
A 150 ohm 1/2W CC resistor with the leads cut short soldered in series with the grid cap (insulate with heat shrink tubing) >> shielded cable terminated by an RCA plug (shield connected only at the RCA jack side) >> RCA jack (barrel grounded to chassis) solved the stability issue.
A 150 ohm 1/2W CC resistor with the leads cut short soldered in series with the grid cap (insulate with heat shrink tubing) >> shielded cable terminated by an RCA plug (shield connected only at the RCA jack side) >> RCA jack (barrel grounded to chassis) solved the stability issue.
![]() |
| A well behaved 2C22/7193 |
Subscribe to:
Posts (Atom)






