Line Transformers for Digital Audio

Altec 15356 + UTC A20

While browsing at Books Kinokuniya in NYC in the 90's, this Noguchi ad from the November 1994 MJ Audio Technology issue inspired me to experiment with line transformers as digital sound enhancers. Since I was living on a post-grad assistantship budget back then, importing this pair from Japan was out of the question.

Minimalist Twin-Armed Thorens TD124

Ever since I left this twin-tonearm compatible TD124 plinth in the attic, I've been trying to find the simplest way to use two tonearms on this turntable.

JE Labs Man Cave 2024

This is the side of the man cave where I spend a lot of time listening and evaluating new projects.

In the coming months, I will be talking about phono preamps, autoformer volume control, revisit the transformer coupled line stage topology, SE amps, etc. I will also continue my classic Japanese idler-driven turntable series, feature a couple of SE-DHT amp-friendly drivers + more.

Most of the audio components listed below are hyperlinked if you mouse over the text. Those that are not will be linked once the article is uploaded.

I like to taste new sonic flavors that are within the DIY realm😊

JEL man cave tour

3D printed WP12024 horn from Lycan R&R

In late September, I received a message from Trieu of Lycan R&R, asking if I'd be interested in evaluating his 3D-printed prototype pair of multi-cell horns.

Before proceeding further, this blog entry contains a lot of hyperlinked texts to either previous entries or other sites pertinent to the article (e.g. "Lycan R&R" above). Mousing over and clicking those texts will open the link on another page. Thanks!

Design notes from Trieu: "These horns are slightly wider. The original KS12024 has a rather narrow 50° horizontal dispersion. When updated to the 1" driver opening, the wider initial diameter of the of the 1" driver would not allow for the throat geometries to work correctly. I felt the slim vertical profile of the original KS12024 is important sonically.

The best way to maintain it is to increase the horizontal width via a wider angle. So I increased the horizontal dispersion to 62.5° allowing for the proper expansion and geometries of the throat piece. BTW, I used carbon fiber infused PLA filaments."

OJAS Listening Room @ USM in SoHo NYC

I never imagined 30 years after the late Don Garber closed his Fi audio gallery at 30 Watts Street, that there would be a similar gallery in SoHo NYC again.

In the summer of 2022, I visited Devon Turnbull's OJAS exhibit at the NYC Lisson gallery. Click here to read about it. This past summer, a similar exhibit was presented at the London Lisson gallery. 

As soon as the London exhibit concluded, Ken Micallef, whom I follow on YouTube, uploaded this video featuring OJAS hifi systems inside a posh SoHo boutique. This was the main motivation to add it to my list of must-see places on my next NYC trip! 

Without further ado, here's what Tish and I experienced when we visited in mid November 2023.

Harana Audio @ the November 2023 Hi-Fi Show

After a four-year hiatus, my frequent collaborator and buddy, Joey of Harana Audio is back in the game with Klangfilm inspired speakers. 👍👏😊