Friday, May 4, 2018
Friday, April 20, 2018
M42 camera bodies and lenses
![]() |
| A quartet of M42 SLRs |
Between 2016-2017 I acquainted myself with these mechanical M42 SLR cameras and lenses. These four camera bodies left a lasting impression on me for personal, historical and sheer shooting pleasure along with the lenses I used them with. Aside from shooting film, I also adapted the lenses to my trusty Fuji X-E1.
![]() |
| Yashica Penta J + Yashinon 5cm f2 |
I have a special affinity for the Yashica Penta J since my dad taught me how to take pictures using this camera. This was the first M42 mount body produced by Yashica. It doesn't have a light meter and the shutter speeds are limited from 1/2-1/500 + B but the viewfinder is fairly bright (at par with the Pentax Spotmatic) assisted by a split image focusing screen. The standard Yashinon 5cm f2 lens is rather special and has caught the attention of aficionados which has driven its value up recently.
![]() |
| Pentax Spotmatic SP + Super Takumar 50mm f1.4 |
This is the camera most closely associated with the M42 mount. It gets more credit for popularizing the M42 screw mount than the much earlier Zeiss-developed Contax S later known as the Pentacon SLR, shown below. It is similar in size to the Yashica above with a similar spec'ed viewfinder but equipped with more comprehensive shutter speeds from 1s-1/1000 + B. The built-in light meter is broken on this flea market find. I bought this camera primarily because of the sought after Super Takumar 50mm f1.4.
![]() |
| Pentacon ZI + Isco-Gottingen Westagon 50mm f2 Pentacon F + CZJ Tessar 50mm f3.5 |
More info on Contax/Pentacon 35mm SLRs.
![]() |
| Fujica ST801 + Zeiss Jena Tessar 50mm f2.8 |
![]() |
| Lesser Fujica siblings |
M42 lenses
Thursday, April 5, 2018
Garrard 301 - minor restoration
![]() |
| ca. 2003 |
I acquired this early grey grease-bearing model at a Hamfest around '96. I was the only person willing to shell out $240, which was the firm asking price of an elderly gentleman.
![]() |
| Attic - ca. 2009 |
It travelled back to Manila with me in '08 where it had to endure the extreme humidity of the tropics. Despite the adverse conditions, its performance remained very stable during the 8 years spent there.
The original grey hammer tone finish had deteriorated due to corrosion so I asked my assistant to mask the important mechanical bits. 😉
I think she did a pretty good job. What do you think? 😁
I used Rust-oleum silver hammerite spray paint which is a lighter shade than the Garrard original.
I cleaned, flushed and re-packed the main bearing with 2 NGLI grease. The motor had no issues, so I just put a few drops of oil. Unlike the E50 motor in the Thorens TD124 which needs periodic motor servicing, I've never opened the motor on this 301.
When I acquired the unit, the power switch was already broken. I've had this spare speed selector switch in my parts bin for over 15 years courtesy of my buddy Joel. While waiting for the paint to cure, I cut and filed it down to function as a power switch.
Not a bad fit. 😎
I cleaned up 15 years of dust and soot build up on the plinth and then applied sealer and wax.
Here's to many more years of service! 🍻
Subscribe to:
Posts (Atom)




























